Advantages and working conditions of Rolled Tube

- Dec 04, 2018-

In the process of working, the Rolled Tube is simply to reduce the surface roughness of the workpiece. When the Rolled Tube is working, there will be a sand bar. A lot of abrasive grains are placed on the sand bar. If sufficient pressure is applied to the abrasive grains, the Rolled Tube will be rubbed at a certain speed and then on the surface of the workpiece. Such extrusion and hanging side can reduce the surface roughness of the workpiece finely.

Rolled Tubes also have a certain movement trajectory on the surface when the sand bars run and move up and down. The cutting speed of the honing pipe is relatively low, which can greatly improve the efficiency of honing.

Advantages of Rolled Tube

1. The processing time of the Rolled Tube is greatly shortened, and mass production is faster.

2. The straightness and precision of the Rolled Tube are greatly improved compared to the honing tube.

3. The surface hardness of the Rolled Tube is higher than that of the honing tube, which increases the service life.www.ht-tube.com