First, the gasoline pump draws the oil from the fuel tank to the atomizer, and after the atomization, it burns to generate force! This force drives the movement of the piston. The piston then transmits the force to the crankshaft through the chrome plated rod. After the crankshaft rotates, the force is transmitted to the gearbox, and the car is gone! In the whole of the piston rod plays a role in the transmission of force
It is a kind of pressure finishing process, which utilizes the cold plasticity characteristic of metal in normal temperature state. The rolling tool is used to apply a certain pressure to the surface of the workpiece to make plastic flow of the surface metal of the workpiece and fill it into the original residual low concave valley. And the surface roughness of the workpiece is reduced. Due to the plastic deformation of the rolled surface metal, the surface layer is cold hardened and the grain is thinned to form a dense fibrous shape, and a residual stress layer is formed, and the hardness and strength are improved, thereby improving the wear resistance and corrosion resistance of the surface of the workpiece. Sex and fit. Rolling is a non-cutting plastic working method.