Factors of mechanical leakage of Honing Cylinder Tubes
There are reasons for mechanical leakage. For example, the stability of the hydraulic system depends on the design of the hydraulic system seal and the selection of seals. Due to the unreasonable selection of the seal structure in the design, the selection of seals does not conform to the specification, and it is not considered in the design. To the compatibility of hydraulic oil and sealing materials, load conditions, working speed, and changes in ambient temperature. These all directly or indirectly cause hydraulic system leakage in different components.
In addition, due to dust and impurities in the operating environment of construction machinery, suitable dust-proof seals should be selected in the design to prevent dust and other dirt from entering the system to damage the seal and contaminate the oil, resulting in leakage. The design takes into account that the geometric accuracy and roughness of the moving surface is not complete, and the strength of the connection part is not checked in the design, which will cause leakage in the work of the machine .
It can be seen that there are many factors that cause mechanical leakage. If the mechanical sealing performance of the honing pipe is to be good, it is necessary to pay attention to the selection of materials when designing and manufacturing, and the correct operation is required to make it work properly.
https://www.ht-tube.com/