Conventional operation method of small welding positioner equipment

- Aug 11, 2019-

With the development trend of miniaturization of mechanical equipment becoming more and more obvious, the application of small welding positioner equipment in the market is more and more extensive, but it is necessary to know that each manufacturer adopts different technologies, so they are small. The method of operation of the welding positioner is also different.

 

But one thing is the same, that is, before using the small welding positioner, make sure that each plug is connected correctly and reliably. At the same time, it is required that the grounding wire on the equipment is soldered to the ground reliably, so that the vortex air pump can be effectively protected. Free from damage.

 

After eliminating all safety hazards, you can turn on the power of the small welding positioner and turn the power indicator on after the power switch is turned on. Under normal circumstances, the small welding positioner has two kinds of automatic and manual operation. If it is in the manual state, it needs to control the rotation of the table by stepping on and releasing the foot switch; when the machine enters the automatic state, the process And time control is automatically controlled by the system.

 

On the instrument panel of the small welding positioner, a direction rotation switch and a speed adjustment button are provided to control the rotation direction and the rotation speed of the table. There is also a time control function for the small welding positioner, which enables the positioner to automatically operate in a predetermined cycle.

 

In addition, the small welding positioner also has the welder interface function, which is the key to realize the linkage between the welder and the positioner. Of course, the implementation of these functions also requires the corresponding switch or button to be adjusted to the specified position. For example, if the user does not want to use the welder linkage, the LOCK toggle switch can be turned OFF before starting the positioner.

 

http://www.ht-tube.com/