In the process of operation, the welding roller frame is independent of the driving roller and the driven roller. During operation, it can be arbitrarily combined according to the weight and length of the welding piece. It is very flexible and convenient when used, and the welding roller is used. The frame is driven by a controllable AC motor, the frequency converter is regulated, and the stepless speed regulation can be realized, and the operation is stable and flexible. Standard foot switch, power cord.
The roller of the welding roller frame is covered with polyurethane by its steel wheel. It has large friction and long service life during operation. The transmission is very stable. Standard configuration: main wheel, attached wheel, control box, power cord, foot switch . The rollers on both sides of the driven roller frame can be offset in the same direction along the vertical center line, thereby changing the axial friction component of the roller and the weldment. This adjustment method has the advantage of high sensitivity.
The rollers on both sides of the driven roller frame of the welding roller frame can be horizontally moved perpendicularly to the axis of the weldment at the same time, thereby achieving the purpose of adjusting the axis of the weldment and adjusting the angle of the axis of the roller. This adjustment method has the advantages of good stability, low manufacturing cost, simple structure and no additional installation space.www.ht-tube.com