Operating principle of honing tube fault diagnosis

- Sep 15, 2019-

The operating principle of honing tube fault diagnosis, because once the honing tube fails, there will be more involved, and more related parts and even the entire equipment will be adversely affected, so it is necessary to diagnose the fault in time. exclude. The relevant principles are as follows.

 

It should be determined whether the working conditions of the honing pipe and the surrounding environment are normal; at the same time, it is necessary to clarify the nature of the fault, is it a failure of the mechanical part of the equipment or the control part of the electrical appliance, or is it a failure of the honing pipe itself? In addition, it is necessary to check whether the various conditions of the honing pipe meet the requirements of normal operation.

 

Secondly, according to the phenomenon and characteristics of the honing tube fault, the area related to the fault is determined, thereby gradually narrowing the range of the fault and detecting the components in the area.

 

In order to avoid blindness, it is necessary to carry out comprehensive analysis and logical judgment according to the basic principles of the system to find out the faulty part of the honing pipe. Since the honing tube fault diagnosis is based on the operation record and some system parameters, it is critical to establish the system operation record; and it has certain detection means, and can also accurately quantify the honing tube fault.

 

http://www.ht-tube.com/