The inner wall surface is made of high-quality metal material, which is smooth, wear-resistant and durable.
High-precision piston rod , stable and durable.
The assembly accuracy is high, no lubrication is required, and the use effect is good.
The cross section is smooth, the work is stable, and the corrosion resistance is strong.
Various optical measurement systems, suitable for shafts, turned and ground parts, nuts and bolts, etc.
For parts manufacturers, it is often difficult to obtain accurate and objective results when measuring turned threads (usually fittings and shafts) and rolling threads.
Using one instrument, it is possible to measure not only rotating joints and threads, but also screws and bolts in a simple and automatic manner within a few seconds.
Provides a new method for measuring shafts and turned parts, combining decades of optical measurement experience with the key functions of contact measurement.
Crankshaft manufacturers prefer flexible solutions rather than rigid solutions to follow the drastic changes in their production that can also be foreseen in the future. The piston rod is a connecting part that supports the work of the piston, most of which are used in the actuator.
The material of the hydraulic cylinder rod is usually 45# steel, after quenching and tempering, the surface is turned and ground, the thickness of chrome plating is 0.03~0.05mm.
The precision piston rod is the connecting part that supports the work of the piston, most of which are used as the executive parts of the oil cylinder and the pneumatic cylinder, which are moving parts with high frequency and high technical requirements. Take the hydraulic cylinder as an example. It consists of a cylinder, a piston rod (cylinder rod), a piston and an end cover.
Coat the rust-proof surface to be oiled on the material, and pack each rod in a paper tube, and then pack it in a wooden box with a steel frame.
https://www.ht-tube.com/