Processing steps and quality requirements of honing pipes

- Mar 28, 2019-

Machining process steps

The material selection of the honing pipe: the honing pipe needs to select the metal material of the appropriate size according to the national standard as the raw material bar for processing the honing pipe. The blanking, free forging and heat treatment processes are effective for the blanking of the raw material bar. Free forging and heat treatment processes.

Straightening of the honing pipe: Effective for straightening of the forged hammer through the treated raw material bar.

The deep hole of the honing pipe: the pipe is made by punching a through hole of a suitable size on the raw material bar.

Honing: honing the through hole of the pipe with honing oil stone, so that the through hole of the pipe meets the requirements of the size and processing precision required by the honing pipe.

The outer round planing of the car: the outer wall and the end surface of the pipe are processed and planed by the lathe, so that the outer diameter of the pipe meets the requirements of the size and processing precision required by the honing pipe, and the honing pipe is completed. Honing is a very effective processing method for machining the inner hole, which not only has high productivity but also high processing precision.

How to ensure the quality of the honing pipe

In order to ensure the quality of the honing pipe, we can take some necessary measures from the following aspects to achieve the purpose:

1. Guarantee the quality of the materials used in the workpiece itself.

2. Guarantee the quality of the honing or honing head.

3. Guarantee the quality of the honing fluid.

www.ht-tube.com