Slewing and tilting drive of welding positioner

- Mar 16, 2019-

Slewing and tilting drive of welding positioner

In the process of operation, the welding positioner is mainly a general and efficient welding equipment which mainly realizes the circumferential seam welding. It can be equipped with argon arc welding machine, gas metal arc welding machine and plasma welding machine. Wait for the welder power supply and can form an automatic welding system with other machines.

Slewing drive of welding positioner

1. The rotary drive of the welding positioner should achieve stepless speed regulation and can be reversed.

2. The welding positioner can rotate within the range of the speed of rotation and its speed can not exceed 5% when it can withstand its maximum load.

Tilt drive of welding positioner

1. The tilting drive should be smooth, not shaken under the maximum load, and the whole machine should not be overturned. If the maximum load Q exceeds 25kg, it should have a power drive function.

2. There should be a limit device to control the tilt angle and an angle indicator.

3. The tilting mechanism should have a self-locking function, which does not slide under the maximum load, and is safe and reliable.

 

The welding positioner should be provided with a conductive device to a certain extent, so that the welding current can be effectively prevented from passing through the transmission parts such as bearings and gears. The resistance of the conductive device should not exceed 1 mΩ, and the capacity should meet the requirements of the rated current of the welding.www.ht-tube.com