Stainless steel precision drawn cold drawn tube needs to be cleaned before welding

- Sep 03, 2019-

Stainless steel fine drawn cold drawn tubes need to be cleaned before welding. Try to use argon arc welding. When using manual arc welding, a small current should be used for rapid welding to avoid oscillation. Arcing is strictly prohibited in non-welded areas. The grounding wire is positioned correctly and the connection is firm to avoid arc wear.

 

Anti-splash measures (such as painting) should be taken during welding. After welding, the slag and splash are thoroughly removed with a precision stainless steel tube (carbon steel is not allowed). Under less corrosive conditions, such as water pipes or hot water up to 100 °C, there is no need to worry about rust, and there is no need to worry about the small inner diameter or large resistance caused by the "rust bumps" commonly found in galvanized steel pipes. Thereby obtaining a water flow that is not blocked.

 

Stainless steel fine drawn cold drawn tubes need to be cleaned before welding. Try to use argon arc welding. When using manual arc welding, a small current should be used for rapid welding to avoid oscillation. Arcing is strictly prohibited in non-welded areas. The grounding wire is positioned correctly and the connection is firm to avoid arc wear. Anti-splash measures (such as painting) should be taken during welding. After welding, the slag and splash are thoroughly removed with a precision stainless steel tube (carbon steel is not allowed).

 

http://www.ht-tube.com/