The arrangement of honing pipes

- Jul 23, 2018-

The piping equipment for honing should be in accordance with the piping and hydraulic schematic diagram. To a certain extent, other components, components and accessories should be carefully selected except the honing pipe itself. Secondly, the laying arrangement and direction of the honing pipe must be orderly and consistent, and the layers should be clear. If parallel and cross honing pipes exist in the system, it is necessary to pay attention to the gap between them. In addition, the configured honing pipe should also have good performance, such as rigidity and vibration resistance, etc. In order to enhance the safety and stability of the laying pipe, the corresponding support and pipe clamp should be configured to avoid displacement in the use process.

Honing pipe is different from common pipe material, so there are very special requirements for both its processing method and pipeline layout. These two aspects are described in detail in order to give full play to the function of honing pipe.

The honing pipe is a kind of high precision seamless steel pipe which has been specially treated. When the honing pipe is laid out, both the alignment and the direction of the honing pipe should be in order and in a clear hierarchy. Use horizontal or vertical layout as far as possible, and there are strict rules on parallelism and perpendicularity.