The process of honing the tube

- Jul 25, 2020-

During the machining process, there is a process control method that can shorten the honing time, and it is easy to keep the theoretical line contact on the entire tooth surface. The point contact between the grinding tool and the workpiece is reduced. Although this may be contrary to the requirement to generate larger residual compressive stress, the stress will still keep it in theoretical line contact. Continuously changing the contact conditions will produce good dynamic characteristics and will not cause severe chattering of machine tool components due to the swing angle. This kind of dynamic characteristics will seriously affect the machine tool when single-sided linear contact honing. To reduce this effect, double-sided wire contacts should be used as much as possible.