The production principle of honing tube

- Dec 20, 2019-

Generally speaking, the production of honing tubes requires complex processes and strict inspections to produce them. Because it is used in the production of mechanical parts, the precision requirements of honing tubes are very high. With the development of science and technology, the continuous improvement of its production process will greatly help improve the production efficiency of honing tubes.

In order to improve its production efficiency, we have adopted a new production process, which is produced by grinding and automatic grinding. Among them, automatic grinding includes the use of electric or ultrasonic grinding to complete production tasks. Good production technology to improve production efficiency. In recent years, we have adopted the above-mentioned grinding methods to produce grinding tubes and have achieved good results. Internal and external grinding is no longer a problem. We believe that with our continuous efforts, we should be able to achieve better process development.

The daily working principle is mainly to generate pressure on the sand particles on the belt, and to perform surface grinding at the speed. The upper and lower surfaces of the workpiece are ground back and forth by the up and down movement of the abrasive belt to achieve a certain effect. Of course, during the grinding process, the lubricant must be continuously added and cooled to avoid affecting the surface processing quality of the workpiece. This type of workpiece is only a rough machining workpiece, which requires a product with high machining accuracy.

As the name suggests, seamless steel tubes are actually a type of jointless steel, which can be round, square or rectangular. It is mainly made of steel ingots or solid tube billets. Capillary tube is first made by perforating process, and then qualified steel is made by hot rolling, cold rolling or cold drawing process. According to different processes, general seamless steel tubes are divided into two types, one is hot-rolled seamless steel tubes, and the other is cold-rolled or cold-drawn seamless steel tubes.

Honing tubes are mainly made by cold drawn tubes, but honing can not be performed on any equipment, and related equipment is required to operate.

https://www.ht-tube.com