Welding positioner monitoring system and application requirements

- Mar 14, 2019-

Welding positioner monitoring system and application requirements

In the process of operation, the welding positioner mainly adopts the stepless speed regulation of its frequency converter. During the operation, the speed regulation range is wide and the precision is high. When the machine is used, its starting torque is large, and the welding positioner is large. To a certain extent, it mainly adopts the grooved steel core rubber roller with its special design. The whole equipment has large friction, long service life and strong carrying capacity.

The combined box-type base of the welding positioner has high rigidity and strong bearing capacity during operation. The process of the equipment is very advanced in the process of making the shaft, and the straightness and parallelism of each shaft hole are good. The maximum limit in the process reduces the amount of workpiece turbulence caused by insufficient manufacturing precision. The welding positioner automatically adjusts the angle of the roller bracket according to the diameter of the workpiece to meet the support and rotational drive of workpieces of different diameters.

Welding positioner monitoring system

The monitoring system of the welding positioner mainly consists of a monitor, a camera and an illumination source. In the process of operation, the lens is a 3-8mm miniature (with night vision) lens, and the middle is made of aluminum foil and metal mesh. The layer-shielded coaxial video cable transmits the CCD-coupled signal and the terminal uses a high-definition image monitor.

The monitor adopts CPU control single-chip technology, video display drive amplifier circuit design, wide working voltage range, and is an ideal image display device for monitoring system. Cooperating with our company's cross fine adjustment mechanism, the welding efficiency is greatly improved and the working environment of the operator is improved.

The principle and application of welding manipulator

When the welding manipulator is used in combination with a welding roller frame, a welding positioner, etc., a special device for automatically welding the inner and outer ring peaks, fillet welds, and inner and outer longitudinal joints of the member to a certain extent is fixed. , Rotary, full position and other structural forms. According to the needs of users, we can choose the structure and support various welding machines and add auxiliary functions such as tracking, swinging, monitoring, flux recovery and transportation.www.ht-tube.com