The welding positioner will involve the user's concept of equipment and equipment in the process of operation, as well as the different uses for hand-held and automatic welding. When selecting and designing the welding positioner, in addition to becoming a degree of freedom, Also need to consider increasing the degree of freedom of auxiliary displacement. Such as large pieces of welding, can increase the freedom of movement and movement.
For some weldments, due to the simple distribution of the welds, the ship's welding requirements for most and important welds in the weldment can be solved with one degree of freedom of rotation. The remaining small amount of non-essential welds, although not capable of ship fillet welding, can be Perform flat fillet welding. In this way, in order to simplify the cost of the equipment, a single-degree-of-freedom or functionally degraded welding positioner, that is, a single-rotation positioner, is considered in the process. Auxiliary degrees of freedom can also be increased depending on the requirements of use. For example, lift and tailstock move and so on.
Welding positioner In order to be suitable for the welding station's process requirements, some degrees of freedom of such equipment are irrelevant to the welding, and two or more welding positioners are combined in design from the station design and stability. This has led to a variety of station shifting and combined multi-degree of freedom welding positioner products.
The welding positioner will have a good connection, water connection, gas connection and heat conduction and ventilation performance to a certain extent. The structure of the whole equipment should have good airtightness, so that the welding spatter can be effectively avoided. The slag, the coating, etc. scattered on it should be easily removed.http://www.ht-tube.com/