Maintenance of large caliber rolling pipes

- May 12, 2020-

With the increasing use of large-diameter rolling pipes, the quality of their products has become more and more uneven. Large-diameter rolling pipes are important equipment components. In addition to the quality of the material, it can affect its service life. Daily maintenance is also an important measure to improve its work efficiency and increase its service life.

After using a large-diameter rolling tube for a period of time, there will usually be some minor faults. Once they are ignored, small problems will become big problems. Since the main working part of the large-diameter rolling tube is the piston and the cylinder part, the piston and the cylinder part are prone to problems, so the maintenance of this part also becomes very important. The common problems in this part are the scratching of the piston rod and the wear of the cylinder. Once there is a problem in this part, the normal work of the large-diameter rolling tube is difficult to carry out, so timely inspection and repair are necessary. If the large-diameter rolling pipe emits some strange sounds during work, it means that there is a problem in the cylinder and needs to be resolved in time.

In addition, when the large-diameter rolling pipe is working, part of the mechanical energy will be converted into heat energy, so it is necessary for the user to check the change of oil temperature in a timely manner. Because the initial movement of the piston of the large-diameter rolling tube is difficult, when operating the machine, the piston of the large-diameter rolling tube should be allowed to run freely for a small amount of time without load. The main operating medium in large-diameter rolling pipes is liquid oil, so it is required to keep the liquid oil clean.

The normal work of the large-diameter rolling pipe requires human normal maintenance. When using it, you should read the instructions carefully and understand it before you can use it.

https://www.ht-tube.com