Practical application and installation precautions for Welding rotator frame

- Nov 07, 2018-

The Welding rotator frame is mainly used for cylindrical assembly and welding during the process of use. The Welding rotator frame can be used with manual welding as a device for detecting and assembling cylindrical workpieces. For some non-circular long-shaped weldments, if It is installed in a special ring clamp and can also be welded on the Welding rotator frame.

 

The Welding rotator frame needs to be properly adjusted for the height of the main and driven rollers, and can also be assembled and welded by the vertebral body and the segmented slewing body. The practical application of the Welding rotator frame can greatly improve the quality of the weld and reduce the weld quality. Labor intensity, improve work efficiency.

 

The transmission device of the Welding rotator frame drives the active roller, and the friction between the active roller and the cylindrical workpiece is used to drive the workpiece to realize the displacement, and the inner and outer annular seams of the workpiece and the horizontal position welding of the inner and outer longitudinal joints can be realized, and the automatic welding equipment is matched. Automatic welding is possible.

Welding rotator frame installation precautions

1. Before the equipment is installed, make the basis of the equipment, ensure the normal curing period of the concrete, and ensure that the installation position of the equipment is on the same horizontal line.

2. When the equipment is installed, install and fix the equipment according to the installation requirements of general equipment. It can be fixed by expansion bolts (or fixed by pressure plate). When installing, put the two sets of rollers in parallel, the center should be consistent, and ensure the parts of the equipment. Integrity.

3. After the equipment is installed, check whether the parts of the equipment meet the assembly requirements, and ensure the normality of the electrical wiring of each part, check and clean the periphery of the equipment to ensure that there are no obstacles affecting the normal operation of the equipment. The device can be powered on only if several tasks have been successfully completed.

http://www.ht-tube.com/