The work of the honed tube is actually to reduce the surface roughness of the workpiece, but many people do not know how the honing tube works. Let's take a brief look at how the honing tube works.
There will be a sand bar when the honing pipe is working. A lot of abrasive grains are placed on the sand bar. If there is enough pressure on the sand particles, the honing pipe will rub at the corresponding speed and then the surface of the workpiece. Such extrusion and hanging side can reduce the surface roughness of the workpiece finely.
There is also the fact that when the sand strip runs and moves up and down, the abrasive particles will form corresponding movement trajectories on the surface. The cutting speed of the honing pipe is relatively low, which can greatly increase the efficiency of honing.