In the process of operation, the roller frame can be effectively divided into single motor roller frame and double motor roller frame according to the number of driving motors. Each roller frame has mechanical and electrical parts. composition. The mechanical part consists of two parts: active and driven. The working mode of the roller frame is synchronous operation of the motor and the reducer of the driving wheel, and the stepless speed change is realized by the frequency conversion speed regulating controller, the mechanical transmission noise is low, the workpiece rotation is stable, and the linear speed of the workpiece rotation is infinitely adjusted.
The roller frame is automatically adjusted within a certain range of the workpiece diameter, which saves manpower and improves work efficiency. The active part of the roller frame is mainly composed of a base, a motor, a reducer, a transmission gear, a yuan treasure frame and a roller. The driven part is mainly composed of a base, a yuan treasure frame and a roller.
In order to ensure the quality of the stainless steel products, ensure the performance of the equipment and prolong the service life of the roller frame during use, it is necessary to clean the outer surface of the roller frame before use. All transmissions should be carried out regularly. Lubrication check. During the lubrication and use, foreign objects should be avoided. Close the switch to start the motor test and see if the operation of each part is normal. Make sure you have no problem before you can work. The height and longitudinal position of the main follower roller frame are required to be installed. If placed poorly, the weldment will be displaced during rotation. Usually pay attention to the hygiene around the equipment. Make the device work properly in a clean environment.www.ht-tube.com