Internal chrome plated honed tube with low cutting allowance and versatility

- Jul 02, 2019-

The internal chrome plated honed tube is mainly processed with various cylindrical holes: through holes, axial and radial discontinuous holes, such as holes with radial holes or slots, keyway holes, spline holes, blind holes, multi-step holes Wait. In addition, with a special honing head, it is also possible to machine tapered holes, elliptical holes, etc., but because the boring head has a complicated structure, it is generally not used. The cylindrical honing tool can be used to honing the cylinder, but the margin of removal is much less than the margin of the inner honing. Honing can be used to process almost any material, especially diamond and cubic boron nitride abrasives, further expanding the application of honing and greatly improving the efficiency of honing.


Internal chrome-plated honing tube has less cutting allowance


The internal chrome-plated honing pipe is used to achieve the precision required by the drawings. The honing process is a processing method that removes less margin in all processing methods. In the honing process, the honing tool uses the workpiece as a guide to cut off the excess allowance of the workpiece to achieve the required precision of the workpiece. When honing, the honing tool first picks up the place where the amount of the workpiece needs to be large, and then gradually picks up the place where the margin is less.