Knowledge

The processing technology and advantages of the cylinder tube

Advantages: Improve the surface roughness, which can basically reach Ra≤0.08μm . Correct the roundness, the ellipticity can be ≤0.01mm . Improve the surface hardness, eliminate the force deformation,

The characteristics and uses of the cylinder tube

Pneumatic component tube; inner and outer roughness can reach Ra0.1-0.4, inner and outer diameter tolerance zone can reach 0.02mm ; the inner and outer surfaces have no defects such as pressure pits,

The principle of setting constant pressure when honing the cylinder tube

In the shedding cutting stage of honing the cylinder tube processing, at the beginning of this constant-pressure honing, due to the rough hole wall, the contact area between the oilstone and the hole

The honing process of hydraulic cylinder honing tube

The honing process of hydraulic cylinder honing tube and which workpiece parameters,In the honing process of hydraulic cylinder honing pipes, honing tools are widely used, and the more commonly used o

Straightness standard of honing tube

The honing precision is high, the inner hole precision is H7-H10, the inner hole roughness is less than 0.63nm , and the standard straightness is less than 0.3mm/m . High-precision honing pipes are us

Knowledge about cold drawn pipes and honing pipes

The quilted pipe is a kind of high-precision steel pipe that is processed by cold-drawn pipe or hot-rolled pipe. Due to the advantages of no oxide layer on the inner and outer walls of the quilted pip

The advantages of honing the surface of the honing tube

The honing surface is cross-textured, which is conducive to the storage of lubricating oil and the maintenance of the oil film. It has a higher surface support rate (the ratio of the actual contact ar

Trouble shooting of stainless steel honing tube as hydraulic cylinder

Stainless steel honing pipe can usually be used as the main body of hydraulic cylinder. The quality of its processing directly affects the service life and reliability of the product itself. Therefore

Common cooling methods in the quenching of honing pipes

A single liquid quenching method. The honing tube or component is heated to austenitization and quenched into water, oil or other cooling medium, and then air is extracted for cooling after a predeter

The processing technology of the honing tube and the advantages brought by th...

The honing tube is processed by rolling. Because the surface layer leaves the surface residual compressive stress, it helps to close the surface micro-cracks and hinder the expansion of erosion. So as

The stainless steel cylinder tube Profile

The use of stainless steel for the cylinder tube has the characteristics of small product design and long service life. Because stainless steel has high strength and corrosion resistance, compared wit

The 16Mn Hydraulic Cylinder Tube advantages

Improve the surface roughness, and the roughness can basically reach Ra≤0.08μm . Correct the roundness, the ellipticity can be ≤0.01mm . Improve the 16Mn Hydraulic Cylinder Tube surface hardness,