Knowledge

Processing steps and quality requirements of honing pipes

The material selection of the honing pipe: the honing pipe needs to select the metal material of the appropriate size according to the national standard as the raw material bar for processing the honi

Pipe arrangement and special requirements for Honed tubes

The Honed tube is different from the ordinary pipe when it is used, so there are very special requirements regardless of the processing method or the pipe arrangement. The Honed tube is essentially a

Standard configuration and tensile strength of cold drawn tubes

In the process of operation, the cold drawn pipe is a kind of high-precision steel pipe material mainly after cold drawing or hot rolling. In use, there will be no oxide layer and cold bending in the

Precautions and bending characteristics of rolling tubes

Rolling tube is a kind of pressure finishing process. It utilizes the cold plasticity characteristic of metal at normal temperature. The rolling tool is used to apply an appropriate amount of pressure

Arrangement requirements for honing pipes

The piping equipment of the honing pipe should be in accordance with the piping and the hydraulic schematic. To a certain extent, in addition to the honing pipe itself, other components, components an

Process selection and processing method of honing pipe

Honing cutting process during honing pipe processing

Definition of honing and quenching treatment and constant pressure requirements

The piping design and piping of the honing pipe should be consistent with the hydraulic schematic to a certain extent. To a certain extent, in addition to the honing pipe itself, other components, com

Machining accuracy and advantages of honing pipes

The honing pipe has high precision in the process of processing, and to some extent, especially some small and medium-sized optical through holes, in general, the cylinder can reach 0.001 mm or less.

The honing tube has a wide processing range and a small cutting allowance

The surface quality of the honing pipe is good, and the surface of the honing pipe is cross-mesh, which is more conducive to the storage of the lubricating oil and the maintenance of the oil film. Whe

The honing tube has a wide processing range and a small cutting allowance

The surface quality of the honing pipe is good, and the surface of the honing pipe is cross-mesh, which is more conducive to the storage of the lubricating oil and the maintenance of the oil film. Whe

Advantages and characteristics of rolling process for rolling pipe

The rolling pipe is processed by the rolling process. This method is chosen because it facilitates the sealing of the micro cracks on the surface of the pipe, thereby improving the fatigue strength of